Adjusting Electronic Iris (For Manual Or Fixed Iris Lens); Iris Setting (Ei: Electronic Iris) - Sanyo VCC-WD8575P Instruction Manual

Adjusting Electronic Iris
If you need to adjust the brightness for using manual iris lens or fixed iris lens, follow the steps below.
• Adjust the iris manually.
MAIN MENU
LANGUAGE
TITLE
SYNC
EXPOSURE
DAY/NIGHT
WHITE BALANCE
ALARM
OPTION
PRESET
EXPOSURE
MENU
(SET)

IRIS SETTING (EI: Electronic Iris)

1 1
1 1
Adjust the brightness (iris) (1 – 100).
IRIS SETTING
PRESET
MENU
• The greater the number, the brighter it gets.
21
English
SET
OFF
INT
SET
AUTO
ATW SET
SET
SET
OFF
END
[LEVEL]
40
40
OFF
BACK
(For Manual or Fixed Iris Lens)
For accessing the MAIN MENU, see page 13 – 14.
IRIS EI
2 2
2 2
Set "MENU" to "END" and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select "BACK" and
press the SET button.
MEMO:
A manual iris lens or a fixed iris lens is recommended for indoor
monitoring.
Note:
• Under extremely bright lighting, unfavorable phenomena may occur
such as swaths of smear on the screen, because light intensity
entering the lens is too high to be controlled. Reduce the intensity by
changing the angle of the lighting source or by other means.
• If the images of subjects under fluorescent lighting are flickering,
replace fluorescent lighting with incandescent lighting.
• The shutter speed set in the AI mode will be overridden.
(See page 29)
• Setting "WIDE-D" to "ON" will force the iris setting from "EI" to "AI".
This setting will remain "AI" after setting "WIDE-D" to "OFF".
(See page 26)
EXPOSURE SETTING
IRIS EI
WIDE-D OFF
BLC OFF
SENSE UP OFF
SHUTTER -----
PRESET OFF
MENU BACK
SET