About This Manual; Manual Organization - Supero A+ SERVER User Manual

About This Manual

This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the A+ SERVER 2042G-TRF/6RF.
Installation and maintenance should be performed by experienced technicians
only.
The A+ SERVER 2042G-TRF/6RF is a high-end quad processor server based
on the SC828TS+-R1400LPBP 2U rackmount server chassis and the Super
H8QG6/i-F serverboard. The H8QG6/i-F supports four AMD 6000 processors.
Please refer to our web site for an up-to-date list of supported processors.
The A+ SERVER 2042G-TRF contains an H8QGi-F serverboard without SAS2
features while the A+ SERVER 2042G-6RF contains an H8QG6-F serverboard
with SAS2 features.

Manual Organization

Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super H8QG6/i-F serverboard
and the SC828TS+-R1400LPBP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the A+ SERVER
2042G-TRF/6RF into a rack and check out the server confi guration prior to powering
up the system. If your server was ordered without the processor and memory
components, this chapter will refer you to the appropriate sections of the manual
for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the A+
SERVER 2042G-TRF/6RF.
Preface
iii
Preface