Table of Contents
Advertisement
5-7
Adding PCI Add-On Cards
The 2042G-TRF/6RF can accommodate low-profi le (only) add-on cards installed
into all the PCI slots included on the H8QG6/i-F.
Installing an Add-on Card
1.
Begin by removing the PCI slot shield for the slot you wish to populate.
2.
Fully seat the card into the riser card slot, pushing down with your thumbs
evenly on both sides of the card.
3.
Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shields protect the serverboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.
Chapter 5: Advanced Serverboard Setup
5-11
Advertisement
Table of Contents
