Figure 3.8 Serial Port Setting - Advantech AIMB-253 Series User Manual

Mini-itx intel core 2 duo/core duo/ core solo mini itx main board

Hide thumbs Also See for AIMB-253 Series:

Table of Contents

Serial Port Setting

Figure 3.8: Serial Port Setting

Onboard Serial Port 1 / 2 / 3 / 4 / 5

Select an address for Serial Port 1/2/3/4/5.

Serial Port 1 / 2 / 3 / 4 / 5 Use IRQ

Select a corresponding interrupt for Serial Port 1/2/3/4/5.

Serial Port 2 / 3 Mode

These settings specify the transmission mode of the Serial Port 2 & 3.

RS-422 defines a Balanced (differential) interface, specifying a single,

unidirectional driver with multiple receivers (up to 32). RS-422 will sup-

port Point-to-Point,

Multi-Drop circuits, but not Multi-Point.

RS-485 defines a Balanced (differential) interface, specifying bidirec-

tional, half-duplex data transmission. Up to 32 transmitters and 32 receiv-

ers may be interconnected in any combination, including one driver and

multiple receivers (multi- drop), or one receiver and multiple drivers.

Chapter 3 BIOS Setup

Table of Contents