Table of Contents
Advertisement
2.6.3
Serial ATA Connectors: SATA1, SATA2
SATA1~SATA2 are high-speed SATA interface ports and support SATA
data rates of 150MB/s. Each SATA connector can connect to 1 hard disk
device and is fully compliant with Serial ATA 1.0 specifications.
Serial ATA cable
Connect to SATA1/2
Figure 2.6: Serial ATA Connectors: SATA1, SATA2
Note
Please do not fold the Serial ATA cable into 90-degree angle.
Otherwise, data loss may occur during transmission.
2.6.4
Audio Amplifier Connector: JAMP1
The JAMP1 is used to connect audio amplifiers to enhance audio perfor-
mance.
Figure 2.7: Audio Amplifier Connector: JAMP1
Table 2.3: JAMP1Pin Definition
1
PIN
1
2
3
4
SATA1
SATA2
Take out the dust cover and
connect to the hard disk
devices
JAMP1
Pin Definition
15
Chapter 2 Hardware Setup
AMP_L-
AMP_L+
AMP_R-
AMP_R+
Advertisement
Table of Contents
