Programming Examples - Toshiba TOSVERT VF-S15 series Function Manual

6.

Programming examples

This chapter provides programming examples which control the inverter with the PLC.
6.1 Reading the inverter status
6.2 Setting the command mode
6.3 Setting the operation commands
6.4 Setting the reference frequency
6.5 Setting the monitoring function
6.6 Writing a parameter value
6.7 Reading a parameter value
6.8 Reading the the fault record
6.9 Inverter reset
System configuration for programming example
Master unit
PS Q02 QJ61
Unit CPU BT11N
(X/Y00
to 1F)
The example of CC-Link communication network composition
･CPU
･Master unit
･Input module
･Output module
･CC-Link dedicated cable
･Inveter
･CC-Link option
Item
Reading the inverter status from the buffer
memory of the master station.
Command mode from CC-Link is confirmed.
Commanding the forward rotation.
Setting to 50.00Hz.
Monitoring the output frequency.
Setting the f311 [Reverse-run prohibition
selection] to [1 : Prohibit reverse run].
Reading the parameter f311.
Reading the fault record
Resetting the inverter.
Input Output
Unit Unit
(X20 (Y30
to X2F) to 3F)
X0020 Y30
CC-Link communication cable
Mitsubishi Electric Corp.
Mitsubishi Electric Corp.
Mitsubishi Electric Corp.
Mitsubishi Electric Corp.
Kuramo Electric Corp.
Toshiba
Toshiba
Programming Example
Station 1
Inverter
- 35 -
E658130
Refer to Page
- 38 -
- 39 -
- 40 -
- 40 -
- 41 -
- 42 -
- 42 -
- 44 -
- 45 -
Station 2
Inverter
Q02CPU
QJ61BT11N
QX40
QY40P
FANC-110SBH
TOSVERT VF-S15(2 uints)
One station is occupied
CCL003Z(2 units)