Double Setting Is Selected (Cc-Link Ver.2) (C122=1); Quadruple Setting Is Selected (Cc-Link Ver.2) (C122=2) - Toshiba TOSVERT VF-S15 series Function Manual

5.5.2. Double setting is selected (CC-Link Ver.2) (c122=1)

This option occupies one station area of the buffer memory of the PLC.
In the case of c122 = 1, there are remote I/O (RX, RY both 32 bits(same as CC-LINK
Ver.1)) and the remote register (RWw, RWr both 8 word) in the communication data for one
station area.
* Default value of RY and RX is 0.
Remote register (Default value = 0)
RWr
Address
RWr n Monitor value 1
Monitor value 2
RWr n+1
(output frequency)
RWr n+2 Reply code
RWr n+3 Read data
RWr n+4 Monitor value 3
RWr n+5 Monitor value 4
RWr n+6 Monitor value 5
RWr n+7 Monitor value 6
"n" is depend on the station number.

5.5.3. Quadruple setting is selected (CC-Link Ver.2) (c122=2)

This option occupies one station area of the buffer memory of the PLC.
In the case of c122 = 2, there are remote I/O (RX, RY both 32 bits(same as CC-LINK
Ver.1)) and the remote register (RWw, RWr both 16 word) in the communication data for one
station area.
* Default value of RY and RX is 0.
Remote register (Default value = 0)
RWr
Address
RWr n Monitor value 1
Monitor value 2
RWr n+1
(output frequency)
RWr n+2 Reply code
RWr n+3 Read data
RWr n+4 Monitor value 3
RWr n+５ Monitor value 4
RWr n+６ Monitor value 5
RWr n+７ Monitor value 6
Upper 8
Bits
RWr n+8
Lower 8
Bits
RWr n+9 Trip information (output frequency)
RWr n+A Trip information (output current)
RWr n+B Trip information (output voltage)
RWr n+C Trip information (energization time)
RWr n+D Reserved*
RWr n+E Reserved*
RWr n+F Reserved*
"n" is depend on the station number.
* The bit described "
Reserved
** Do not use it.
Inverter → PLC
Signal
Inverter → PLC
Signal
Trip history No.
Trip code
" is unstable. Don't use the "
RWw
Address
RWw n Monitor code (1 and 2)
RWw n+1 Set frequency
RWw n+2 Instruction code
RWw n+3 Write data
RWw n+4 Monitor code 3
RWw n+5 Monitor code 4
RWw n+6 Monitor code 5
RWw n+7 Monitor code 6
RWw
Address
RWw n Monitor code (1 and 2)
RWw n+1 Set frequency
RWw n+2 Instruction code
RWw n+3 Write data
RWw n+4 Monitor code 3
RWw n+5 Monitor code 4
RWw n+6 Monitor code 5
RWw n+7 Monitor code 6
Upper 8
Bits
RWw n+8
Lower 8
Bits
RWw n+9 Reserved**
RWw n+A Reserved**
RWw n+B Reserved**
RWw n+C Reserved**
RWw n+D Reserved**
RWw n+E Reserved**
RWw n+F Reserved**
" bit for the judgment.
Reserved
- 18 -
E658130
PLC → Inverter
Signal
PLC → Inverter
Signal
Trip history No.
Reserved**