5.5.10.
Description of reply code
When executing the frequency setting (RYnD) or instruction code execution (RYnF), check the
reply code (RWr (n+2), (n+10), (n+14), (n+16), (n+18)) in the remote register after execution.
Reply code
(Hexadecimal No.)
Data
Item
0000H
Normal (No error)
0001H
Write mode error
Parameter selection
0002H
error
0003H
Setting range error
Normal completion of instruction code
execution.
Parameter write was attempted during operation
other than a stop.
Unregistered code number was set.
Set data is outside the setting data range.
- 32 -
E658130
Description