Overview; Basic Specifications - Toshiba TOSVERT VF-S15 series Function Manual

1. Overview

The option allows the VF-S15 drive to be connected into a CC-Link network. CC-Link supports a
maximum of 42 nodes, allowing for the Master and this option is based on CC-Link V1.1 and V2.0.
The CCL-003Z is able to operate RUN/STOP, monitor the status of the drive, set the drive's parameter
and etc. by the CC-Link master through installing the VF-S15. And it can use various applications.

2. Basic specifications

<Environmental specification>
Item
Operating
environment
Ambient
temperature
Storage
temperature
Related
temperature
Vibration
<CC-Link communication and option specification>
Item
Number of units
corrected
Baud rate
Power supply
Station type
Number of stations
occupied
Connect cable
Specification
Indoors, an altitude of 3,000m or less, where the product will not be exposed
to direct sunlight, corrosive or explosive gasses, vapor, coarse particulates
including dust and where there is no grinding fluid or grinding oil nearby.
0 to + 60 degreeC
-25 to +65 degreeC
20 to 93% (no condensation and absence of vapor)
2
5.9 m/s (0.6G) or less (10 – 55Hz)
Specification
42 units max. (1 station occupied by 1 unit). May be used with other
equipment.
156k, 625k, 2.5M, 5M, 10Mbps
Supplied from SBP009Z
Remote device station
Ver.1: occupies one station, V2: occupies one station (selectable from among
double, quadruple and octuple)
CC-Link dedicated cable,
CC-Link V1.10 compatible CC-Link dedicated cable
- 4 -
E658130