Specifications - Toshiba MR-3022 Service Manual

1.

SPECIFICATIONS

Item
Maximum number of originals
on the original feeding tray
Acceptable paper size
Acceptable paper weight
Dimensions
Weight
Power consumption
Power requirements
Co-packed items
Applicable models
Remarks
© 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved
MR-3018/3020
Up to 100 sheets or 16 mm in height.
2
* 35 - 80 g/m (9.3 - 21.3 lb. Bond)
A5-R, A4, A4-R, B5, B5-R, B4, A3,
FOLIO, ST-R, LT, LT-R, LG, LD, COM-
PUTER
2
1-sided: 35 - 157 g/m
(9.3 lb. Bond - 58 lb. Cover)
2
2-sided: 50 - 157 g/m
(13.3 lb. Bond - 58 lb. Cover)
W600 x D523 x H135 (mm)
* Excluding hinges and original tray
12.5 kg
Approx. 49.5 W
DC5 V, DC24 V
* Supplied from the equipment
Unpacking Instruction (1 set)
Charts (A4/LT: 1 sheet each)
Mounting screws (6 pcs)
Positioning pins (2 pcs)
Washer (1 pc)
MR-3018:
e-STUDIO352/353/452/453
e-STUDIO281c/351c/451c
e-STUDIO2500c/3500c/3510c
e-STUDIO2330C/2820C/2830C/
3520C/3530C/4520C
MR-3020:
e-STUDIO202L/203L/232/233/282/
283
1 - 1
11/12
MR-3021/3022
←
←
←
W575 x D528 x H135 (mm)
* Excluding original tray
←
←
←
Unpacking Instruction (1 set)
Charts (A4/LT: 1 sheet each)
Mounting screws (6 pcs)
Positioning pins (2 pcs)
Washer (1 pc)
Stopper bracket (1 pc)
Stopper bracket fixing screw (2 pcs)
MR-3021: e-STUDIO205L/255/305,
e-STUDIO206L/256/306,
e-STUDIO2040C/2540C/
3040C
MR-3022: e-STUDIO355/455,
e-STUDIO356/456,
e-STUDIO3540C/4540C
The differences between MR-3021
and MR-3022 are the RADF control
PC board and connection cable.
MR-3018/3020/3021/3022
SPECIFICATIONS
1