Sensor/Switch - Toshiba MR-3022 Service Manual

4.5

Sensor/switch

[A] Original tray width sensor (S2)
(1) Take off the original reverse tray.
( P. 4-5 "[F] Original reverse tray")
(2) Remove 2 screws. Release 8 latches and
separate the original tray into 2 parts.
(3) Remove 1 screw and take off the cover.
(4) Disconnect 1 connector and take off the orig-
inal tray width sensor.
Note: Note:
If washers (3 pcs) and a pinion come off,
assemble them in the order as shown in the
illustration.
MR-3018/3020/3021/3022
DISASSEMBLY AND ASSEMBLY
Pinion
© 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved
4 - 26
06/09
Fig. 4-72
Cover
Connector
Original tray
width sensor
Fig. 4-73
Washer ( Black: t= 0.25 )
Washer ( Gold )
Washer ( Black: t= 0.13 )
Fig. 4-74