Remote Station Access (Call Button); Attendant Station Dialing Plan - Valcom V-2924A User Manual

•
Attendant unlocks door by pressing "*" key
twice while connected to door speaker (door
speaker must be connected to one of the last four
zones of the main board making the door unlock
feature available)
•
Attendant must hang up to terminate call
Remote Station Access - Call Button
Button Presses
1 press
2 presses
3 presses
4 or more presses

Attendant Station Dialing Plan

2 Digit Zone Access to Individual Stations:
Dial Codes
10..33
"**" during HF to
zone 30,31,32, or 33
(Station 1 = code 10, station 2 = code 11, ......station 24 = code 33)
3 Digit Zone Access to Individual Stations:
Dial Codes
101..124
"**" during HF to zone
121, 122, 123, or 124
(Station 1 = code 101, station 2 = 102, ..... station 24 = code 124)
Page Codes
external all call
(multiple V-2924As)
system all call
"*" during 1-way page
"##" during any
connected call
#60 - Serial Group Call - User may select any combination of page codes during dialing. Group 10 (External All Call) is not a valid
code selection when using these dial codes.
The attendant may dial a new zone or group during a conversation. The current conversation will be disconnected and the new
request connected without the attendant needing to return to dial tone.
Originate call to attendant
Meet-Me / Follow-Me if appropriate (see definitions)
Ignored
Originate emergency call to attendant
Handsfree speakers - Main board
Operate relay for longer of 2.5 seconds or duration
of second press; operation may be repeated as long
as connected.
Handsfree speakers - Main board
Operate relay for longer of 2.5 seconds or duration
of second press; operation may be repeated as long
as connected.
Dial Codes
1
#10
#11
#12
#14
#60 (Example: #60 + 71 + 73 + *)
#61
#62
#70
#71
#72
#73
Set Time hh:mm:ss
#92
Cancel Emergency Tone
#93
Mute page while waiting for "Meet Me"
Disconnect current call connect to next
queued call or receive dial tone if none
queued.
Functions
Functions
Functions
Groups
2 3 4
13