Measuring Resistance - UNI-T UT60H Operating Manual

Model UT60H: OPERATING MANUAL
Measurement Operation(6)
E. Measuring Resistance
Warning
To avoid harms to you, please do not attempt to input
voltage higher than 60V DC or 30V rms AC.
To avoid damages to the Meter or to the devices under
test, disconnect circuit power and discharge all the
high-voltage capacitors before measuring resistance.
The resistance ranges are:400 , 4k , 40k ,400k ,
4M and 40M .
To measure resistance, connect the Meter as follows:
1. Insert the red test lead into the
black test lead into the COM terminal.
2. Set the rotary switch to
button to select
3. Connect the test leads across with the object being
measured.
The measured value shows on the display.
(see figure 5)
(figure 5)
terminal and the
; Press SELECT
measurement mode.
20