Supervisor And User Security - TYAN Thunder 100 S1836 User Manual

Supervisor and User Security

You can limit access to the Setup Program or to the system using the
Supervisor and User password options (the Supervisor password gives
you access to the Setup Program and the system; the User password,
only to the system). Note that you must create a supervisor password
before you create a user password. If you select the User Security
option first, the following dialog box will appear:
When you select the Supervisor Security option, a dialog box (shown
below) will appear, allowing you to enter a password. You may either
type the password in, or click on the onscreen buttons. Your password
must be between one and six characters long.
Once you have entered your new password, you will be asked to
confirm it. If the two passwords do not match, you will be prompted to
enter a new password, and then to confirm it. This will continue until
you enter the same series of characters both times. Once this is accom-
plished, a dialog box will appear and notify you that the Supervisor
S1836 Thunder 100
87