Creative Labs Sound Drivers Installation Note - TYAN Thunder 100 S1836 User Manual

Chapter 3
Onboard Resource Settings
For more information on Fast Ethernet, visit the Network Products
website (http:// www.intel.com/network).

Creative Labs Sound Drivers Installation Note

For 1836DLUAN-GX Win NT 4.0
Creative Labs Vibra16 Setup
Note: This note assumes drive D: for your CDROM drive.
1) Install NT 4.0 and Service Pack 3 onto your hard drive.
2) Login as Administrator
3) Rename C:\WINNT\INF\WAVE.INF
C:\WINNT\INF\WAVE.OLD
4) Go to D:\DRVLIB\PNPISA\X86 on your WinNT CDROM
5) Right Click on PNPISA.INF.. Select "Install". This will start the
Plug and play driver installation.
6) Restart the system when prompted. Login as Administrator.
a)After logging in, you will get a "New Hardware Found" dialog box:
"Creative ViBRA16X PnP (Audio)"
"Select which driver you want to install for your new hardware"
(Driver from disk provided by hardware manufacturer)
b) Insert the Tyan Computer CDROM into he CDROM drive.
Wait 5-10 seconds, then Click on OK.
7) The "Install from disk" dialog box appears.
a) Type in the drive letter of your CDROM drive (Ex. D:\), then
Click on "Browse".
b) Double Click "Audio"
c) Double Click "S1836"
d) Double Click "WINNT 40"
e) Click "Open" D:\Audio Driver\S1836\WinNT 40 will be
displayed.
f) Click "OK" .
8) The "Select Device" screen shows "Creative Sound Blaster 16 Plug
and Play"
a) Click "OK" files are copied
9) Then the "Sound Blaster 16 Configuration" screen shows the
resource allocation for the Sound Blaster feature. If there are
54
http://www.tyan.com