Supervisor And User Security - TYAN S1837 User Manual

Supervisor and User Security

You can limit access to the Setup Program or to the system using the Supervi-
sor and User password options (the Supervisor password gives you access to
the Setup Program and the system; the User password, only to the system).
Note that you must create a supervisor password before you create a user
password.
(c)1998 American Megatrends, Inc. All Rights Reserved
Main Advanced
Set Supervisor Password [ Enter ]
Set User Password [ Enter ]
ESC:Exit Enter:Select F5:Setup Defaults F6:Original Values F10:Save & Exit
When you select the Supervisor Security option, a dialog box will appear,
allowing you to enter a password. You may either type the password in, or
click on the onscreen buttons. Your password must be between one and six
characters long.
Once you have entered your new password, you will be asked to confirm it. If
the two passwords do not match, you will be prompted to enter a new pass-
word, and then to confirm it. This will continue until you enter the same series
of characters both times. Once this is accomplished, a dialog box will appear
and notify you that the Supervisor Password has been installed. You may then
select the User Security option and enter a password for the user.
You can enter a new User password at any time simply by selecting the User
Security option, and typing in a new password. To enter a new Supervisor
S1837 Thunderbolt
AMI BIOS EASY SETUP UTILITY Ver.1.16
Security Exit
83
Setup Help
Change the supervisor
password
↑
Previous Item
↓
Next Item
← →
Select Menu