Setting Jumpers - TYAN Thunder 100 S1836 User Manual

Setting Jumpers

In this manual, the terms "closed" and "on" are used when referring to
jumpers (or jumper pins) that are active; "open" and "off" are used
when referring to jumpers (or jumper pins) that are inactive. Jumpers
and pins are connected by slipping the blue or black plastic jumper
connector overtop of two adjacent jumper pins. The metal rod inside
the plastic shell bridges the gap between the two pins, completing the
circuit. See the drawings below for examples of "on" and "off" pins
and jumpers.
2 pin jumpers
off on
26
3 (or more) pin jumpers
1-2 2-3
1
1
2
2
3
3
open
1
2
3
http://www.tyan.com