Table of Contents
Advertisement
3.5 Installing Air Duct/Air Baffle-Wall
NOTE: The air duct & baffle-wall are pre-installed for protection purpose during the
transportation. They have to be detached from the chassis before installing
processor(s) and heatsink(s).
Picture of air duct & baffle-wall
1. Place the air duct
CPU-1 with front side adjoining the
central retention bar (See picture at
right)
2.
Make the side wing of the air duct
stuck in between the first two fins of
the CPU_2 heatsink.
3.
Place the air baffle-wall
along the power supply with 3
mounting holes in alignment with those
on motherboard.
4.
Use 3 hexagonal head screws to
secure the air baffle-wall.
B
Air duct for the CPU1
A
(closer to the blowers)
on top of the
A
B
standing
http://www.tyan.com
Air baffle-wall to duct the air to
CPU2 (closer to the rear I/O)
CPU1 &
Heatsink
CPU_1
A
Air baffle-
wall
15
Central Strud
A
Stuck this wing in
between the first
two heatsink fins
CPU_2
Mount to the
chassis here
CPU_2
Advertisement
Table of Contents
