Triumph Daytona 675 User Manual page 18

1. Remove the airbox lid.
2. Remove the
funnels. Retain the fixings (2 per air
funnel) for reuse.
3. Fit the 2 long race kit air funnels to
cylinders 1 & 2 and the short air funnel
to cylinder 3.
NOTE
• The cylinders are numbered 1 to 3
from left to right of the engine.
4. Fit one of the fixing retainers provided
to each air funnel and retain with the
original fixings. Apply ThreeBond 1364
locking compound to the threads only
and tighten the fixings to a torque value
of 6 Nm.
© Triumph Designs Ltd 2008.
standard intake air
Page 18 of 33
5. Fold the retention tabs, on the fixing
retainers, over the 6 fixings as shown
below.
1
2
1. Retention tab
2. Fixing