Race Harness Kit - A9618071 - Triumph Daytona 675 User Manual

Race Harness Kit
Parts supplied - A9618071
Item Description
1 Main harness, race
2 Connector, quick shift
NOTE
• The race harness will not work without the Race ECU A9618070.
• The relay and fuse box position has changed on the race harness for ease of access and
maintenance. They are now located alongside the battery, under the seat. Ensure they
are secured in position so they do not suffer from vibration problems.
• The race harness does not support all of the OE equipment, therefore, the following
components can be removed from the motorcycle; oxygen sensor, exhaust valve, idle
speed control, secondary air injection (SAI), purge control (California only), lights and
air intake flap solenoid. The SAI ports must be blocked off if the system is removed.
The throttle body purge ports must be blocked of before use (California only).
• The race harness still supports the cooling fan and incorporates a relay for the fan. You
may remove the cooling fan but must leave the relay in place.
• The race harness does not support the idle speed control motor and therefore, this may
be removed from the throttle body. It is recommended to use the manual idle speed
adjuster A9618076 to replace the throttle stop screw when using the race harness.
Throttle body balance should be checked if the ISC cam is removed from the throttle
body assembly.
• The race harness is suitable for use with both the standard and race kit alternator. It is
recommended to always run an alternator, without it the battery will discharge in a
very short period of time.
• The combination of the race ECU and race harness allows the ability to have ignition
cut for "quick shift". To use this feature connect a suitable 5V 2mA switch to the
supplied connector and mount the switch in a convenient position. When the switch is
pressed the ignition will cut for 40ms.
• If the quick shift function is not going to be used, leave the harness connector blanked
off to avoid possible short circuits.
© Triumph Designs Ltd 2008.
Page 32 of 33
Qty
1
1