Air Filter Kit - A9618075; Slipper Clutch Kit - A9610014; Slipper Clutch Tool - A3880037 - Triumph Daytona 675 User Manual

Air Filter Kit
2
Parts supplied - A9618075
Item Description
1 Air filter
2 Retaining washer
NOTE
• This kit is supplied by BMC Air Filters. For fitment details refer to the
instruction contained in the kit.
• If you have any queries with regard to the air filter kit, in the first instance
contact BMC. For contact details see; www.bmcairfilters.com.
• Loctite or similar should NOT be applied to the fixings as described in the
supplied instructions as this could strip the insert out of the plastic moulding
when removing the filter. The kit is supplied with 3 plastic retaining washers
to retain the fixings. The 3 plastic retaining washers should be fitted to the 3
rear fixings as shown above. Tighten the fixings to a torque value of 4 Nm.

Slipper clutch Kit - A9610014

• The slipper clutch kit is supplied by STM Trading s.r.l. For fitment details refer
to the instruction contained in the kit.
• If you have any queries with regard to the slipper clutch kit, in the first
instance contact STM. For contact details see; www.slipperclutch.com.

Slipper clutch Tool - A3880037

• It is recommended to use the slipper clutch tool when fitting the slipper
clutch.
© Triumph Designs Ltd 2008.
1
2
Page 23 of 33
Qty
1
3