Filtering Mac Address - TRENDnet TEG-S2400i User Manual

4.2.8.2. Filtering MAC Address

MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the
destination addresses.
In this page user can add /modify /delete filter MAC address.
Add filter MAC address
Actions->
1. Press <Add> --> <Edit> key to add a filter MAC address.
2. MAC Address: Type the MAC address to filter.
3. Vlan ID: If tag-based (802.1Q) VLAN are set up on the switch, type the VID to associate with
the MAC address.
Press Ctrl+A to go back action menu line, and then select <Save> to save all configure value.
4.
- 87 -