TRENDnet TEG-S2400i User Manual page 38

5. From the Available ports box, select ports to add to the switch and click "Add >>". If the trunk
groups exist, you can see it in here (ex: TRK1, TRK2...), and you can configure it is the member
of the VLAN or not.
6. Click Next. Then you can view the page as follow
Uses this page to set the outgoing frames are VLAN-Tagged frames or no. Then click Apply.
Tag: outgoing frames with VLAN-Tagged.
Untag: outgoing frames without VLAN-Tagged.
- 38 -