Perport Configuration - TRENDnet TEG-S2400i User Manual

4.3.1.3. Perport Configuration

Actions->
1. PortState: Display spanning tree status about the switch for per port is forwarding or blocking.
2. Select <Edit>.
3. PathCost: Specifies the path cost of the port that switch uses to determine which port are the
forwarding ports.
4. Priority: This means priority port, you can make it more or less likely to become the root port.
5. Press Ctrl +A back to action menu line.
6. Select <Save> to save all configure value.
7. On the action menu line you can press <Next Page> to configure port9 ~ port26, press <Previous
Page> return to last page.
NOTE: All about the parameter description please see the sections 2-4-8.
- 94 -