Create A Vlan Group - TRENDnet TEG-S2400i User Manual
24 +2g single ip management switch
Hide thumbs
Also See for TEG-S2400i:
- Quick installation manual (11 pages) ,
- Manual d'installation rapide (10 pages) ,
- Datasheet (2 pages)
Table of Contents
Advertisement
4.2.3.2. Create a VLAN Group
Create Port-Based VLAN
Create a port-based VLAN and add member/nonmember ports to it.
1.
Select <Edit>.
2.
VLAN Name: Type a name for the new VLAN.
3.
Grp ID: Type the VLAN group ID. The group ID rang is 1~4094.
4.
Member: Press <Space> key to choose VLAN member. There are two types to selected:
a. Member: the port is member port.
b. No: the port is NOT member port.
5.
Press Ctrl+A go back action menu line.
6.
Select <Save> to save all configure value.
NOTE: If the trunk groups exist, you can see it (ex: TRK1, TRK2...) after port26, and you can
configure it is the member of the VLAN or not.
- 66 -
Advertisement
Table of Contents
