Create A Vlan Group - TRENDnet TEG-S2600I User Manual
26-port snmp stackable switch
Hide thumbs
Also See for TEG-S2600I:
- Quick installation manual (15 pages) ,
- Specifications (2 pages) ,
- Manual d'installation rapide (10 pages)
Table of Contents
Advertisement
4.2.3.2. Create a VLAN Group
◆ Create Port-Based VLAN
Create a port-based VLAN and add member/nonmember ports to it.
6.
Select <Edit>.
7.
VLAN Name: Type a name for the new VLAN.
8.
Grp ID: Type the VLAN group ID. The group ID rang is 1~4094.
9.
Member: Press <Space> key to choose VLAN member. There are two types to selected:
a. Member: the port is member port.
b. No: the port is NOT member port.
10. Press Ctrl+A go back action menu line.
11. Select <Save> to save all configure value.
NOTE: If the trunk groups exist, you can see it (ex: TRK1, TRK2...) after port26, and you can
configure it is the member of the VLAN or not.
- 77 -
Advertisement
Table of Contents
