Massage programs and selections
To stop a massage session
•
To stop a massage, press the [
button on the controller. This will bring
the rollers back to the storage position
and all airbags will deflate, ending the
massage.
To pause during a massage
•
Press the [
] button on the controller.
This will temporarily freeze all operations
and [
] icon will appear in the top left
hand corner of LCD. Press the [
button again to resume massage.
Caution
•
In the event of any emergency or
malfunction, push [
massage immediately.
•
To switch off, push [
the rollers to their storage position.
Finally, turn off the main switch.
]
]
] button to stop
] button to return
After using the uDivine
Return the backrest to the upright position
and lower/retract the footrest completely
after use.
Arm massage unit
•
Raise and push down the arm massage
until it returns to its storage position.
Push down
•
To avoid accidents or malfunction of
the uDivine, please switch off the main
switch and disconnect the power plug
from the electrical outlet after use.
•
Always disconnect the power plug from
the electrical outlet if the uDivine is not
being used for a period of time.
31
Raise
Caution