Advertisement
USING THE MASSAGER
1 .
Plug the power cord into an electrical outlet .
NOTE: To reduce the risk of electric shock, this product has a polarized plug
(one blade is wider than the other) . As a safety feature, this plug will fit in a
polarized outlet only one way . If the plug does not fit fully in the outlet, reverse
the plug . If it still does not fit, contact a qualified electrician to install the proper
outlet . Do not alter the plug in any way .
2 .
Turn the ON/OFF Switch, located on the bottom back of the massager, to the
ON ( | ) position .
3 .
Optionally, extend the Kick Stand (located on the bottom front of the massager) .
4 .
Unzip the calf zippers, place your feet all the way into the massager, and rezip
the zippers .
5 .
Press the Power Button in the Control Panel to turn on the massager .
6 .
Select an automatic massage program, as described below, or manually select
your massage options, as described on Page 9
7 .
The massager automatically turns off after 15 minutes of use . To end the
massage earlier, press the Power Button to turn off the massager .
USING AUTOMATIC PROGRAMS
1 .
With the massager powered on, press the Auto Program Button once to turn on
the Soothe Program . The Massage Intensity and Dynamic Squeeze™ Intensity
buttons will be green, indicating the gentlest level of massage . Heat will be
activated in the foot and calf zones .
8
2 .
Press the Auto Program Button a second time to turn on the Pulse Program .
The Massage Intensity and Dynamic Squeeze™ Intensity buttons will be blue,
indicating a moderate level of massage . Heat will be activated in the foot and
calf zones .
3 .
Press the Auto Program Button a third time to turn on the Energize Program .
The Massage Intensity and Dynamic Squeeze™ Intensity buttons will be red,
indicating the most intense level of massage . Heat will be activated in the foot
and calf zones .
While using an Auto Program, you can customize your massage:
•
You can turn the massage feature on or off .
•
You can change the heat feature or turn off heat .
•
You can change the Dynamic Squeeze™ intensity . You cannot turn off the
Dynamic Squeeze™ feature during an Auto Program .
MANUAL MASSAGE AND COMPRESSION OPTIONS
1 .
With the massager powered on, press the Massage and/or Dynamic Squeeze™
buttons to activate the massage and/or Dynamic Squeeze™ feature . The button
will be green, indicating the gentlest level of massage or compression .
2 .
Press the button again . The button will be blue, indicating a moderate level of
massage or compression .
3 .
Press the button a third time . The button will be red, indicating the most intense
level of massage or compression
4 .
Press the button a fourth time to turn off the massage or compression feature .
9
Advertisement
