Adjusting The Aux Preamplifi Cation; Tmc For Dynamic Navigation Systems - Blaupunkt Orlando MP46 Operating Instructions Manual

External audio sources
Note:
If the AUX input is switched on, you can
select it by pressing the SOURCE but-
ton 4.
Adjusting the AUX
preamplifi cation
To be able to adjust for differences in vol-
ume, the level adjustment of the AUX input
can be adjusted in 4 increments (0 to 3).
Press the MENU button 9.
u
u
Press the or
edly until "AUX MENU" appears on the
display.
button : to open the
u
Press the
menu.
u
Press the or
until "AUX LVL" appears on the display.
u button : to open the
Press the
menu.
u
Press the or
the level adjustment.
When you have fi nished making your chang-
es,
press the MENU button 9 three
u
times.
button : repeat-
button : repeatedly
button : to adjust
TMC for dynamic navigation
systems
TMC is the abbreviation for Traffi c Message
Channel. Traffi c announcements are broad-
cast digitally via TMC, which means they can
be used by compatible navigation systems
during route planning. Your car sound sys-
tem has a TMC output, which you can use
for connecting Blaupunkt navigation sys-
tems. You can fi nd out from your Blaupunkt
dealer which navigation systems can be
used with your car sound system.
If a navigation system is connected and a
TMC station is being received, the display
shows TMC.
If dynamic navigation is active, the system
will tune into a TMC station automatically.
TMC
75