Auxmode; Adjusting The Rear Aux Input Mode - Blaupunkt Hamburg MP68 Operating And Installation Instructions

AUX mode
AUXmode
You can connect different external audio
sources to the device via the rear AUX in-
put:
• C'n'C devices from the Blaupunkt acces-
sories programme (e.g. an iPod®/USB
interface) .
• CD changer
• Other external audio sources, such as
portable CD players, MiniDisc players,
MP3 players or anon-C'n'C Blaupunkt
interface.
The C'n'C interface from Blaupunkt (C'n'C
=
Command and Control) allows an even more
convenient control of devices and data car-
riers that are connected to the car sound
system via aC'n'C Blaupunkt interface.
This device is factory set for the connec-
tion of C'n'C Blaupunkt accessory devices.
If you want to connect a non-C'n'C device,
such as a CD changer or another external
audio source, please perform the settings
described in the following sections.
Note
Please note that the current software of
this device may not yet offer any C'n'C
support. In this case, the menu items
"CDC ON" and "C'N'C EDIT' are not avail-
able in the "Syst" system menu.
Your device can be rendered C'n'C-capa-
ble by means of asoftware update.lnfor-
mation about the availability of this soft-
ware and the download can be found
under www.blaupunkt.com.Toinstall
new software, please read the section
36
"Updating the device software" in the
chapter "Additional settings".
Adjusting the rear AUX input
mode
Note
This setting is omitted if the current soft-
ware of this device does not yet offer any
C'n'C support.
You can select between these modes for the
rear AUX input:
• C'n'C mode for C'n'C Blaupunkt inter-
faces.
• Non-C'n'C mode for non-C'n'C Blaupunkt
interfaces, CD changers and other ex-
ternal audio sources.
The COnIC mode is activated by default.
To switch between C'n'C mode and non-
C'n'C mode,
.... press the MENU button
0.
.... Press the
<
rocker switch
@
to open
the "Syst" system menu.
.... Press the rocker switch /\ or
v @
until
the "CDC ON" menu item is selected.
.... Press the OK button
CD
to call up the
menu item.
.... Switch between the settings with the
rocker switch
<
or>
@.
• > "CDC ON"@": Non-C'n'C mode.
• <
"CDC ON"
0:
C'n'C mode.
As soon as you change the setting, the de-
vice briefly switches off and back on again
with the selected setting (Reset).