Adjusting the volume for traffic
announcements and the beep
tone
This volume was preset at the factory,
though you can alter the value using the
DSC function (see "DSC programming – TA
VOL").
You can also change the announcement and
beep volume for the current message only.
Decreasing the volume:
•
Press AF/TA briefly.
The usual volume boost is now disabled and
you can alter the volume as desired. The
priority is deactivated for the current mes-
sage only.
Increasing the volume:
Turn the knob 1
•
.
Cassette operation
The car stereo has to be switched on.
The unit will automatically switch to tape
operation when inserting a cassette.
Inserting a tape
•
Turn on the set.
•
Insert a tape.
Track A or 1 will be played.
During cassette operation, "TR 1" or "TR 2"
(track) will appear in the display.
Insert the tape with side A or 1 facing up, the
open side showing to the right.
Ejecting a tape
•
Press
.
The cassette will eject.
Fast winding
Fast forward
•
Press FF (fast forward).
At the end of the tape the unit will au-
tomatically reverse the direction and
start playing the other side.
To stop fast forward
•
press FR.
Fast rewind
•
Press FR (fast rewind).
At the beginning of the tape the unit
will start playback automatically.
To stop fast rewind
•
press FF.
Fast winding
FR : fast rewind - press FF to stop.
FF : fast forward - press FR to stop.
Reversing the tape
Press both buttons at a time.
TR1 or TR2 will appear in the display.
Reversing the tape
To switch to the other side of the tape dur-
ing playback,
•
press FR and FF simultaneously.
At the end of the tape the unit will automat-
ically reverse to the other side (autoreverse).
The display shows "TR 1" for track (side) 1
or "TR 2" for track 2.
33