Consumer States The Unit Is Leaking At The Spray Bar - Bissell Quickwash BS-1950F Troubleshooting Manual

Consumer states the unit is leaking at the spray bar

Solution 1:
Slide handle assembly down into the lower body of the unit until it will go no further
Place Phillips head screw into rear of handle assembly making sure the screw for
the handle is aligned properly and going straight into the back of the unit. Use
screwdriver to tighten. Is the unit still leaking?
No, problem solved
repared by Monique Lania
P
1950F.doc
Remove the handle on the unit and reinstall it.
How?
Yes, refer customer to an Authorized Service Centre
13 Call Servicing Guide QuickWash