» Do not use outdoors or on opening. wet surfaces. » Do not use with any opening » Do not allow to be used as a toy. blocked. SAVE THESE INSTRUCTIONS FOR FUTURE USE This model is for household use only. www.BISSELL.ca...
Thanks for buying a BISSELL Cordless Vacuum! We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your cordless vacuum works as well in two years as it does today, so this guide has tips on using (pages 6-9), maintaining (pages 10-13), and if there is a problem, troubleshooting (page 14).
Page 4
10 Swivel Head Release Trigger Pet Hair Nozzle Tool Hand Vac Release Button Scoop and Sweep Tool Hand Vacuum Power Button Charging Adapter Dirt Cup Release Crevice Tool with Dusting Brush Charging Light Indicator Charging Base Detachable Hand Vacuum Dirt Cup www.BISSELL.ca...
Assembly WARNING Do not plug in your cordless vacuum until you are familiar with all instructions and operating procedures. Your BISSELL cordless vacuum comes in • Handle three easy to assemble components and • Body does not require any tools to assemble.
Page 6
NOTE: The brush roll will be ON when the stick vacuum is turned ON. Having the brush roll ON may improve cleaning on soft surfaces such as low-pile area rugs. www.BISSELL.ca...
Page 7
Operating 2-Way Folding Handle Find the 2-Way folding handle trigger Pull the trigger to fold the handle. located under the handle. Fold the handle forward to easily Fold the handle back for easy storage. clean underneath low places. www.BISSELL.ca...
Page 8
Removable Hand Vacuum Press the button located on top of the Press the power button to begin hand vacuum handle and lightly pull out cleaning. to remove it from the machine. www.BISSELL.ca...
Page 9
The charging base will recharge your stick vacuum and also store the tools. There are up to three spots to store the tools to your hand vacuum on the charging base. Reminder: The charging port on the base is located underneath. www.BISSELL.ca...
Page 10
Empty the dirt cup into a waste clean off excess dirt and debris. receptacle. WARNING Do not operate your cordless vacuum with damp or wet fi lters or without fi lters in place. www.BISSELL.ca...
Page 11
NOTE: You may rinse the fi lter and frame in warm water to clean. The fi lter and frame need to be 100% dry before reuse. The key to maximum performance is having a clean fi lter. Cleaning the fi lter after each use will help your vacuum operate at peak effi ciency. www.BISSELL.ca...
Page 12
15 seconds for the motor to cool down before turning back on. Brush will function again after allowing time to cool down. NOTE: Make sure the brush roll cover tab is locked back into place to prevent breaking or faulty brush roll. www.BISSELL.ca...
Page 13
-Cut wires from the PCB and wrap the wire ends with insulation tape. -Keep Battery Pack together – DO NOT separate individual batteries. For specific disposal instructions of batteries, please contact RBRC (Rechargeable Battery Recycling Corporation) 1-800-822-8837 or visit www.rbrc.com. -Discard remainder of product. www.BISSELL.ca...
Please do performed by an authorized service representative. not return Thank you for selecting a BISSELL product. this product For any questions or concerns, BISSELL is happy to to the store. be of service. Contact us directly at 1-800-263-2535. www.BISSELL.ca...
Detach foot from main body and examine and remove clog from ports If your BISSELL product should require service: Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. Dirt container is full of debris Empty dirt container...