Bissell Quickwash BS-1950F Troubleshooting Manual page 6

Solution 4:
Does the trigger have tension?
Yes, proceed to solution 5
No, Ensure handle is assembled correctly.
Lay the unit on the floor, face down with the screw hole facing the ceiling
Put pressure on the screw to get it to fully thread into the unit. For units
without the raised screw hole, the screw needs to be aligned perfectly
straight and then tightened into the unit. Does the unit spray now?
No, proceed to solution 5
repared by Monique Lania
P
1950F.doc
No, remove handle, is it damaged?
How?
Yes, problem solved
6
Yes, advise customer to call
Bissell Free Call 1800 number
again and press Option 4 for
spare parts and order
replacement handle
Call Servicing Guide QuickWash