Troubleshooting; Please Do Not Return This Product To The Store - Bissell CLEANVIEW REACH 14U6 SERIES User Manual

T
roubleshooting
Reduced Spray OR No Spray in Upright Mode
Possible causes
1. Solution tank empty
2. Lint screen on solution tank cap clogged
Reduce Spray or No Spray Attachment
Possible causes
1. Solution tank empty
2. Spray nozzle clogged
3. Pump needs priming
4. Machine is reclined
5. ReadyTools dial is set to "FLOOR CLEANING"
Deep cleaner not picking up cleaning solution
Possible causes
1. Collection tank not aligned/secured
2. Collection tank full
3. Removable nozzle installed improperly
4. Removable nozzle full of debris
5. Red lint screen under collection tank clogged
6. ReadyTools dial not set properly
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.

Please do not return this product to the store.

12
w w w . b i s s e l l . c o m
Remedies
1. Refill tank with water and formula
2. Soak solution tank cap in warm water and then rinse under
running water
Remedies
1. Refill tank with water and formula
2. Clean spray nozzle by rinsing tool under water
3. Place tool on floor and press spray trigger
4. Return machine to full upright position until it locks
into place
5. Choose "TOOLS" setting on ReadyTools dial
Remedies
1. Check tank alignment and secure with side latches
2. Empty tank
3. Unplug unit. Align four "hooks" into bottom first, then snap
into place on top
4. Unplug unit. Remove nozzle and rinse under running water
5. Remove debris from lint screen
6. Choose either "FLOOR CLEANING" or "TOOLS" for desired
cleaning method