Cleaning With Attachments - Bissell CLEANVIEW REACH 14U6 SERIES User Manual

O
perations
Empty the collection tank continued
2a. Release collection tank latches (on
each side) by pulling up from the bottom
of latch and then out.
2b. Carefully remove the top of the tank
by lifting up on the tank handle.
3. Carry collection tank to a toilet or sink. To
empty, pour out contents using opening at
back of tank.
4. Rinse collection tank thoroughly and replace
on unit.
5. Refill solution tank and continue cleaning.

Cleaning with Attachments

Your CleanView Reach is equipped with
a hose and at least one attachment for
cleaning stairs, upholstery, and more.
1. Important! If using to clean upholstery,
check upholstery tags.
1a. Check manufacturer's tag before clean-
ing. "W" or "WS" on the tag means you
can use your CleanView
tag is coded with an "X" or an "S" (with
a diagonal stripe through it), or says "Dry
Clean Only", do not proceed with any
deep cleaning machine. Do not use on
velvet or silk. If manufacturer's tag is miss-
ing or not coded, check with your furniture
dealer.
1b. Check for colourfastness in an incon-
spicuous place.
1c. If possible, check upholstery stuffing.
Coloured stuffing may bleed through
fabric when wet.
1d. Plan activities to allow upholstery time
to dry.
1e. Vacuum area thoroughly.
2. Follow the instructions on page 7 for
filling the tank.
3. Set the ReadyTools dial to the "TOOLS" setting.
4. Attach the cleaning tool to the end of the hose.
5. Plug in and turn the power switch to the ON
position.
8
w w w . b i s s e l l . c o m
2a.
3.
Reach. If the
®
2b.
3.
4.
9.