Related Manuals for Bissell 1422 Series
Summary of Contents for Bissell 1422 Series
- Page 1 ANNA 32.4vDC / 120v AC HYBRID UPRIGHT VACUUM CLEANER WITH LIFT-OFF Series 1422 USER GUIDE 1422 Series CONFIDENTIAL...
-
Page 3: Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for five years a defective or malfunctioning part. - Page 4 Product View Product View HYBRID UPRIGHT VACUUM CLEANER LIFT-OFF CAPSULE LIFT OFF DOCKING STATION STAIR TOOL FOOT ASSEMBLY...
- Page 5 Product View HANDLE RELEASE LATCH EXHAUST AIR VENT TELESCOPING HANDLE POWER ON/OFF BATTERY CHECK INDICATOR Touch Control Panel AC SOCKET STRETCH HOSE STORAGE/STANDBY SWITCH DIRT CUP RELEASE DUSTING BRUSH LATCH TELESCOPIC WAND DIRT CUP CREVICE TOOL HOSE HANDLE TILT RELEASE PEDAL DIRT CUP DOOR LATCH BRUSH BAR WINDOW...
-
Page 6: Power Indicators
OPERATIONS FLOOR SETTINGS Preset Floor / Stairs Preset Carpet / Crevice Preset Rugs / Drapes In floor clean mode the FLOOR preset can be pressed = Max In floor cleaning mode the CARPET preset can be pressed = In floor clean mode the RUGS preset can be pressed = Low suction power + Brush Bar OFF. - Page 7 Operations TO CHARGE THE UNIT CHARGING INDICATOR PLUG IN POWER CORD SLIDE SWITCH TO ILLUMINATES, CHARGE WHICH IS CONNECTED CYCLE ON BATTERY STANDBY TO LIVE 120vAC INDICATOR WILL BE SHOWN...
- Page 8 Operations 2. PULL UP HANDLE USE TELESCOPIC HANDLE 1. PULL BACK HANDLE RELEASE CLICK LOCK 4. PUSH DOWN 3. PULL BACK HANDLE HANDLE TO PUT RELEASE TO PUT CLICK HANDLE BACK HANDLE DOWN DOWN LOCK...
- Page 9 Operations- Cordless Mode 1. Once the product is fully charged, UNPLUG THE AC CABLE 2. Slide Switch to standby mode 3. Press the Power Button to turn machine 4. PRESS FOOT PEDAL 5. ENJOY THE FREEDOM OF AND RECLINE CORDLESS VACUUMING...
- Page 10 Operations- Corded Mode 1. Plug in the power cord to the machine and to the wall 2. Slide Switch to standby mode 3. Press the Power Button to turn machine PRESS FOOT PEDAL VACUUM IN CORDED MODE AND RECLINE...
- Page 11 Operations- Tool Selection RELEASE CREVICE RELEASE TELESCOPIC RELEASE DUSTING TOOL WAND BRUSH RELEASE STAIR TOOL...
- Page 12 Operations- Above floor cleaning CREVICE TOOL DUSTING BRUSH TELESCOPIC WAND 1. Remove hose handle from docking foot WITH TOOL 2. Attach desired cleaning tool to end of hose 3. Clean in corded or cordless mode following operations instructions...
- Page 13 3. TO RE-DOCK PLACE REMOVEABLE POD ONTO Operations- Lift-Off® Pod FOOT ALIGNING THE HOSE AND DOCKING STATION 2. LIFT THE PUSH DOWN REMOVABLE POD CLICK LOCK 1. STEP ONTO FOOT RELEASE PEDAL...
- Page 14 Operations- Lift-Off® Pod Above Floor Cleaning LIFT-OFF® + CREVICE TOOL LIFT-OFF® + DUSTING BRUSH PRESS LIFT-OFF® FOOT PEDAL AND LIFT-OFF® + USE THE COMBINATION OF STRETCH HOSE, TOOL AND CORDLESS FREEDOM TO VACUUM WHERE YOU TELESCOPIC WAND + WANT TO TOOL...
- Page 15 Operations- Lift-Off® Pod Stairs VACUUM THE STAIRS REMOVE STAIR TOOL FROM FOOT ATTACH STAIR TOOL TO HOSE...
- Page 16 Maintenance & Care- Empty Dirt Bin 2. PRESS LATCH TO OPEN DIRT CUP DOOR AND RELEASE DEBRIS 1. PUSH BIN RELEASE LEVER AND PULL OUT BIN 3. EMPTY DIRT INTO TRASH BIN...
- Page 17 Maintenance & Care- Clean Filters 1. PUSH BIN RELEASE LEVER AND PULL OUT BIN 2. Rotate the tabs on the top of the dirt bin clockwise 3. Remove filter and tap off large debris. Replace filter by inserting and turning counterclockwise (until the arrows on the filter and dirt bin align).
- Page 18 LOCK Maintenance & Care- Clean Dirt Bin UN-LOCK 1. Separate by twisting the top and bottom in opposite directions. 2. Wipe the cyclone clean with a damp cloth. NOTE: Make sure the cyclone is fully dry before replacing and operating.
- Page 19 Maintenance & Care- Clogs 1. UN-SCREW HOSE END TO CHECK AND REMOVE BLOCKAGES...
- Page 20 Maintenance & Care- Clogs REMOVE BLOACKAGES FROM DUCT LOCATED ON THE UNDERSIDE OF THE FOOT 1. REMOVE HOSE FROM 2. PUSH HOSE BACK INTO HOUSING TO ACCESS AND LOCATION REMOVE BLOCKAGES 3. ENSURE THE LARGER HOUSING RIB ALIGNS WITH THE SLOT AND CAPTURES THE HOSE...
- Page 21 WARNING: To reduce the risk of electric shock disconnect polarized plug from electrical outlet and slide switch to storage mode before servicing the device REMOVE FOOT ASSEMBLY FROM BODY ACCESS TO BRUSH BAR FOR CLEANING AND BRUSH BAR BELT IN CASE OF BREAKAGE UN-SCREW THE SIX SCREWS...
- Page 22 Feedback indication: Indicates AC is connected and All 6 LED’s OFF with AC power ON when illuminated indicator LED ON Battery is fully charged or may occur while battery stabilizes after AC connection is made All 6 LED’s increasing and cycling Battery is charging First 3 LED’s increasing and...
- Page 23 Toll-Free (1)855-267-2662 Hours: Mon-Fri 8am-4:45pm EST Disconnect the main power supply and slide isolation switch When contacting BISSELL, to storage position. Inspect along the entire air path and have the model number of cleaner check for blockages, empty the bin and clean the filter.
-
Page 24: Consumer Care
Consumer Care If your BISSELL product should require service, please contact consumer care before returning the product. Call: BISSELL Consumer Care Toll Free (1)855-267-2662 Monday – Friday 8am-4:45pm EST...