WARNING SHOCK – USE INDOORS ONLY. DO NOT IMMERSE. USE ONLY ON SURFACES MOISTENED BY THE CLEANING PROCESS. USE ONLY BISSELL TO REDUCE THE RISK OF ELECTRIC SHOCK, CLEANING PRODUCTS INTENDED FOR USE WITH ALWAYS INSTALL FLOAT BEFORE ANY WET THIS MACHINE.
Thanks for buying a BISSELL deep cleaner Safety Instructions... 2 We’re glad you purchased a BISSELL deep cleaner. Everything we know Product View....4...
Deep cleaner assembly is now complete. WARNING Cleaning fluid Keep plenty of genuine BISSELL 2X formula on To reduce the risk of fire and electric shock due to internal hand so you can clean and protect whenever it component damage, use only BISSELL cleaning fluids fits your schedule.
It helps to keep the unit fresher and cleaner between uses. To reduce the risk of fire, use only BISSELL deep cleaning formula for full size machines in your deep cleaner. Use of Before you clean cleaning formulas that contain lemon or pine oil may dam- 1. Plan activities to give your carpet time to dry.
To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids Filling the 2-in-1 water tank intended for use with the deep cleaner. Non-BISSELL 1. Remove tank from base of machine by lifting cleaning solutions may harm the machine and void tank carry handle.
Page 8
4. Attach cleaning tool of your choice to end of hose. NOTE: If your deep cleaner came with a Deep Reach Tough Stain Tool, do not follow the cleaning tool instructions below. Instead, follow the “Cleaning with Deep Reach Tough Stain Tool” instructions in the next section. www.BISSELL.com...
Page 9
Push the button at the top of the cleaning tool and slide the front nozzle off the top of the cleaning tool. Rinse the front nozzle and the tool with clean water and replace front nozzle back onto the tool. www.BISSELL.com...
Refer to page 9, illustrations 7 and 8. 8. Wipe machine’s exterior with a soft cloth. 9. After carpet is dry, you may wish to vacuum again to remove any leftover hair and fuzz the deep cleaner may have brought to the carpet surface. www.BISSELL.com...
Page 11
Replace screws. NOTE: Do not over tighten screws. If you have any questions or are having trouble removing, replacing or reinstalling your brush belt or brush, please call BISSELL Consumer Care. www.BISSELL.com...
Page 12
9. Reattach belt access door assembly to end of brush and rotate back into place. Replace screws. NOTE: Do not over tighten screws. If you have any questions or are having trouble removing, replacing or reinstalling your brush belt, please call BISSELL Consumer Care. www.BISSELL.com...
Clean out lint screen, refer to page 8. Please do Other maintenance or service not included in the manual should not return be performed by an authorized service representative. this product Thank you for selecting a BISSELL product. to the store. www.BISSELL.com...
Replacement Parts These items are available for your BISSELL deep cleaner. Visit www.BISSELL.com PART # PART NAME PART # PART NAME 160-3026 Tank Assembly Complete 160-3027 Tank Base 160-2858 Removable Nozzle 160-1543 Replacement Pump Belt (with instructions) 160-1542 Replacement Brush Belt (with...
Accessories These items are available for your BISSELL deep cleaner. Visit www.BISSELL.com PART # PART NAME PART # PART NAME 160-1523 Hard Floor Tool 203-6651 3" Tough Stain Tool 203-6653 4" Upholstery Tool 203-6654 6" Stair Tool 203-6652 Powered TurboBrush™ Tool...
Consumer Guarantee BISSELL DOES NOT EXCLUDE OR LIMIT IN ANY WAY ITS LIABILITY FOR (A) DEATH OR PERSONAL INJURY CAUSED BY OUR NEGLIGENCE OR THE NEGLIGENCE OF This Guarantee only applies outside of the USA and Canada. It is provided OUR EMPLOYEES, AGENTS OR SUBCONTRACTORS;...