Advanced
Static Route
With static route feature, you are equipped with the capability to control the routing of the all
the traffic across your network. With each routing rule created, you can specifically assign the
destination where the traffic will be routed to.
Destination: Enter the destination IP where the traffic is to be forwarded.
Netmask: Enter the netmask of the destination.
Gateway: Enter the gateway address for the traffic.
Interface: Select an appropriate interface for the new routing rule from the drop down menu.
Static ARP
This feature allows you to map the layer-2 MAC (Media Access Control) address that corresponds
to the layer-3 IP address of the device.
IP Address: Enter the IP of the device that the corresponding MAC address will be mapped to.
MAC Address: Enter the MAC address that corresponds to the IP address of the device.
91