Billion BiPAC 7800(N)X(L) User Manual page 43
3g/4g lte (wireless-n) (vpn) adsl2+/fibre broadband router
Hide thumbs
Also See for BiPAC 7800(N)X(L):
- User manual (281 pages) ,
- Setup manual (11 pages) ,
- Quick start manual (10 pages)
Table of Contents
Advertisement
Ethernet mode
1. Select Ethernet, press Continue to go on to next step.
2. Enter the username, password from your ISP, for IP and DNS settings, also refer to your ISP.
Here IPv6 service is enabled by default.
3. Wait while the device is configured.
4. WAN port configuration is success.
Click Done, web configuration will be loaded, you will enter the web configuration page.
38
- Quick Links:
- Configuration Via Web Interface
Hide quick links:
Advertisement
Table of Contents
