Dmz Host - Billion BiPAC 7800(N)X(L) User Manual

DMZ Host

The DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP
address as the DMZ Host, all incoming packets will be checked by Firewall and NAT algorithms
before being passed to the DMZ host, when a packet received does not use a port number used by
any other Virtual Server entries.
DMZ Host IP Address: Enter the IP Address of a host you want it to be a DMZ host. Select from the
list box to quick set the DMZ.
Time Schedule: Select or set exactly when the DMZ works. When set to "Always On", the DMZ will
work all time; and also you can set the precise time when DMZ works, like 01:00 of Sun to 19:00 of
Friday. Or you can select the already set timeslot in Time Schedule during which the DMZ works.
And when set to "Disable", the rule is disabled. See
Using port mapping does have security implications, since outside users are able to connect
to PCs on your network. For this reason you are advised to use specific Virtual Server
entries just for the ports your application requires instead of simply using DMZ or creating a
Virtual Server entry for "All" protocols, as doing so results in all connection attempts to your
public IP address accessing the specified PC.
If you have disabled the NAT option in the WAN-ISP section, the Virtual Server function will
hence be invalid.
If the DHCP server option is enabled, you have to be very careful in assigning the IP
addresses of the virtual servers in order to avoid conflicts. The easiest way of configuring
Virtual Servers is to manually assign static IP address to each virtual server PC, with an
address that does not fall into the range of IP addresses that are to be issued by the DHCP
server. You can configure the virtual server IP address manually, but it must still be in the
Attention same subnet as the router.
Time Schedule.
174