Displaying The Entire Route; Tmc On The Route - Becker MAP PILOT Instructions For Use Manual

Displaying the entire route

You can display the entire route to the
destination on the map. You also have the
option of displaying the complete direc-
tions and blocking particular sections/
roads of the route permanently. As a fur-
ther option you can display the various
routes that you can set in the route op-
tions and also select them if you wish.
> In the My Route menu, select
.
route
The entire route is displayed.
On the left-hand side you can see the dis-
tance to be traveled and estimated journey
time. The destination address appears at
the bottom of the display.
Select to continue route guid-
Resume
ance.
Displaying the route list
You can display the route in a list.
> With the entire route displayed, select
.
Route list
Show
The route list is displayed.
Setting route options
You can set the route options.
> With the entire route displayed, select
.
Options
> Select
Route options
> Set the route options as described under
"Route options" on page 46.
After a change, the route is recalculated.
Simulating a route
You can also start a simulation of the
route.
> With the entire route displayed, select
Options
> Select
The route is simulated at four times the
normal speed.
Pressing
neuver.
The simulation can be canceled by press-
ing the

TMC on the route

You can view and edit TMC messages lo-
cated on your route.
.
Note:
The TMC messages that have led to a
change in the route are also displayed.
> In the My Route menu, select
route
NAVIGATION MODE
.
.
Simulation
switches to the next ma-
CLR
button.
BACK
TMC on
.
>>>
> USE
> FR
> ES
40