Displaying Position; Repeat Announcement; Mute Announcement - Becker MAP PILOT Operating Manual

Displaying position

You can display your current position and
then store it. You can also display
information on the current GPS reception
status.
> In the map toolbox, select
Information
The current position is displayed. An
address is displayed whenever possible.
The geocoordinates are displayed if no
address is available for the current
location.
During active navigation, the destination
address and potential stopovers are
displayed.
You can switch back to the map by
selecting
Resume guidance
destination navigation is active) or
.
to map
To get more user options, push the trotary
control/push button towards the right.
You can save the actual position of the last
targets by selecting
GPS reception information is displayed
by selecting
GPS-Info
.
You can see how many satellites can be
linked to and if satellite reception is
sufficient for navigation. The current time
and geolocation is also displayed.
(when
Return

Repeat announcement

.
During navigation, you can pull up the
Save
current announcement or have the
previous one repeated.
.
> In the map toolbox, select

Mute announcement

You can mute the navigation system
announcements.
> In the map toolbox, select the
icon.
The navigation system announcements
have now been muted. In the lower area of
the map display, the corresponding icon is
displayed, indicating that announcements
have been muted.
> In the map toolbox, select the
icon to unmute the announcements.
NAVIGATION MODE
.
Repeat
>>>
> EN
44