Becker MAP PILOT Operating Manual page 23

Note:
If two words need to be entered you must
enter them by selecting the underscore
character (_).
When sufficient letters have been selected
it will automatically switch to a list from
which you can select the street. However,
you can switch to the list before this by
pushing the rotary control/push button
downwards. You can then select the street
from the list.
Selecting a city
Note:
If you want to enter street first:
> Push the rotary control/push button to
the right.
> Select .
Street first
The destination city can be specified by
entering the name or postal code.
When you select the letters of a city, the
Becker® MAP PILOT displays sugges-
tions. If you do not wish to accept the sug-
gestion simply select the subsequent let-
ters of the desired city.
The Becker® MAP PILOT excludes all
impossible letter combinations and postal
codes and activates only those letters and
numbers that could give the name of an
existing city or postal code.
> Select the letters of the destination city
or the numbers of the postal code con-
secutively.
NAVIGATION MODE
Note:
If two words need to be entered you must
enter them by selecting the underscore
character (_).
When sufficient letters have been entered
it will automatically switch to a list from
which you can select the city. However,
you can switch to the list before this by
pushing the rotary control/push button
downwards. You can then select the city
from the list.
>>>
> EN
22