En Stop Destination Navigation; Map Display - Becker MAP PILOT Operating Manual

>>> NAVIGATION MODE
Stop destination navigation.
> EN You can stop an active destination
navigation.
> In the map toolbox, select
.
guidance
The destination
destinations is stopped.
Note:
You can also stop the destination
navigation as described in Main menu on
page 14.
43

Map display

You can select to view the Map Display in
3D or 2D, split-screen 3D or 2D, or with
arrows.
Stop
You can set the map angle in the 3D
navigation to all display and decide whether or not you
would like 3D attractions and buildings to
be displayed.
> In the map toolbox, select
> Select either
By-Turn
as your primary display.
> Select
.
Map
,
Full map Map with Turn-
, or
Split screen Turn-By-Turn
or as the map display style.
2D 3D
> With the 3D display, by selecting
you can select whether you
Objects
would like to see 3D attractions (
not ( ). At the same time, the
building display is turned on/off.
> With the 2D display, by selecting
you can select whether you
Heading up
would like the map displayed facing the
trip direction ( ) or facing North
( ).
> With Autozoom, you can turn the
autozoom on or off
> During the 3D display, select
to change the angle of the map.
angle
> Select one of the following angles:
, and
Higher Normal Lower
> Save and close your settings by pressing
the L button.
3D-
) or
.
Map tilt
.