Accessories - Friedrich VERT-I-PAK 920-075-13 (1-11) Installation And Operation Manual

Accessories

M O D L E
VPAWP1-8
VPAWP1-14
VPAL2
VPSC2
RT4
RT5
RT6
VPRG4
D
WALL PLENUM Two-part sleeve that telescopes in and out
from 5 ½ " to 8 " in depth. The wall plenum sits inside the
exterior wall penetration.
DIMENSIONS: 30 ⅜ " high x 24
COUTOUT DIMENSIONS: 30
Same as VPAWP1-8, but telescopes 8 " to 14 " as required.
ARCHITECTURAL LOUVER Extruded aluminum louver that
attaches to the outdoor section of the wall plenum.
DIMENSIONS: 31 1 " high x 25
16
Same as VPAL2 but can be ordered in a special color to match
the exterior wall.
DIGITAL REMOTE WALLL THERMOSTAT Single stage
thermostat, used on VERT-I-PAK units. Hard wired with single
speed fan. Direct replacement for RT2.
DIGITAL REMOTE WALL THERMOSTAT Single stage
thermostat. Features high/low fan speed switch. Thermostat is
hard wired and can be battery powered or unit powered.
Features backlit display and multiple configured modes.
DIGITAL REMOTE WALL THERMOSTAT
cool, single stage heat thermostat. Features high/low fan
speed switch. Thermostat is hard wired and can be battery
powered or unit powered. Features backlight display and
multiple configuration.
ACCESS PANEL / RETURN AIR GRILLE – Serves as an access
panel to chassis and interior return air grille. A field-supplied (25"
x 20") filter is mounted inside the hinged access door.
Kit contains hinge bracket for mounting the door with the return air
openings high or low on the door for optimal sound attenuation. For
9,000 / 12,000 / 18,000 Btu models, it is recommended to install
the door with the hinge on the right side and the return air
openings high on the door. For 24,000 Btu models, it is recom-
mended to install the hinge on the left side with the return air
openings low on the door.
DIMENSIONS: 58" high x 29" wide.
COUTOUT DIMENSIONS: 55
E S C I R T P O I N
1 " wide.
8
7 " high x 24 " wide.
5
8
8
9 " wide.
16
Single stage
" high x 27" wide.
3
/
4
P H O T O
17