Installing Cover Plates - Baxi Bioflo Installation & Servicing Instructions Manual

For the Installer

2.10 Installing cover plates

Installation sequence:
– Separate the required feed-throughs for the exhaust pipe, feed and return, transport hoses, etc. from the pre-
punched cover plates.
– Every other hexagon screw (5) at the rear on each side panel should not be screwed all the way to the stop
(1.5 mm gap).
– Hook both side cover plates (2 and 3) in at these screws and fix onto one another using 2 pcs. plastic rivets (4).
– Put on the to cover plate (1) and secure with 2 pcs. plastic rivets (4).
Cover plate FIRE 025 or FIRE 026
comprising:
1 . . . . . .Top cover plate
2 . . . . . .Right cover plate
3 . . . . . .Left cover plate
4 . . . . . .4 pcs. plastic rivets
5 . . . . . .4 pcs. hexagon screws M5 x 12 TT
Other illustrated accessories acc. to price list:
6 . . . . . .Double exhaust pipe bend rigid – AZB 057, for FireWIN exhaust pipe connection in the middle
7 . . . . . .Mounting pedestal – FIRE 022, for pre-mounting FireWIN without finished floor screed
Fig. 41 Installing the cover plates
30