Installing The Hose Connection For Fully Automated Supply - Baxi Bioflo Installation & Servicing Instructions Manual

For the Installer
2.9

Installing the hose connection for fully automated supply

Insert the "standard hose connection downwards" (enclosed in ash pan) or "hose connection upwards" (acces-
sory FIRE 041) into the prepared openings on the rear of the reserve supply container and secure with a screw
to prevent slipping out – Figs. 38, 39.
Routing variants of the hoses and the non-flammable steel pipes in the area of the exhaust pipe, see section 2.6.
Installation of the hoses, see installation instructions in the installation instructions for "Suction turbine FIRE 25"
Fig. 38 Connecting the hose connection to
the reserve supply container
2.10 Mounting plate for non-flammable steel tubes within
the area of the exhaust pipe
That the steel tubes of the supply do not rest against the exhaust pipe, the enclosed mounting
plate can be installed in the back at the rear wall between steel tubes and exhaust pipe – Fig. 40
Fig. 40 Mounting plate for supply steel tubes
Fig. 39 Securing the hose connection with a
screw
29