Using The Gas Hob; Before First Use; Switching The Hob On; Automatic Ignition With Flame Failure Device - Baumatic BHG620SS Instruction Manual

U sing the gas hob

Before first use

IMPORTANT: You should clean the hob surface (see
"Cleaning and maintenance" section).

Switching the hob on

The following symbols will appear on the control panel, next to each
control knob:
= gas off
Large flame: maximum setting
Small flame: minimum setting
The minimum setting is at the end of the anti-clockwise rotation of
o
the control knob.
All operation positio
o
minimum position.
Never se lect a knob position between the maximum and off
o
position.
The symbol on the control panel, ne
o
indicate which gas burner it operates.
Automatic ignition with flame failure safety device
The appliance is fitted with a flame failure safety device on each
burner, which is designed to stop
the event of the flam
To ignite a burner:
Press in the control knob of the burner that yo
o
turn it anti-clockwise to the maximum position.
If you keep the control k
o
the burner will operate.
You should hold down the
o
flame on the burner has lit.
o After this 20 second interval, turn the control knob to your req
setting between the maximum and minimum setting symbols.
ns must be selected between the maximum and
the flow of gas to the burner head in
e going out.
nob depressed, the automatic ignition for
control knob for 20 seconds after the
xt to the control knob will
u wish to light and
uired
13