6. Advanced
Image 6-125
Width set up for projector 2
Adjusting by entering the exact values.
1. When on an adjustable item, the input box background will be colored. Press ENTER.
The value will change to a 3 digit value and the first digit is selected.
2. Enter a value with the digit keys on the remote control.
The cursor jumps automatically to the next digit.
3. Press ENTER to activate the new value.
Use reset to return to the default settings.
6.9.10.4 Black level of the images
Why
For dark images, the overlap zone will be brighter than the rest of the images. Therefore we can rise the black level of the remaining
image (excluding the overlap zone)
How to adjust
1. Press MENU to activate the menu bar.
2. Press → to select the Display setup item. (image 6-126)
3. Press ↓ to pull down the Display setup menu.
4. Use ↑ or ↓ to select Soft Edge.
5. Press → to select the Soft Edge item.
6. Use ↑ or ↓ to select Black level.
7. Press ENTER to select.
A dialog box will be displayed on a black level background.
Adjust the black level of area A until the black level of area A, B and C or equal (area C should be adjusted on the second
projector). (image 6-127)
Use the up or down arrow key to select the adjustment (All, Red, Green or Blue)
Use the left or right arrow key to select the adjustment direction and speed.
Press ENTER to increment or decrement the value.
106
R5976837 BARCO ID R600/R600+ 21/09/2006